期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (1)
The relationship between the late-age hydration and strength development of cement-slag mortars have been investigated by measuring the compressive st......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (2)
To overcome the difficult deformation of common Mg alloys, the Mg-5Li-1Al (wt %) alloy sheet with good strengthductility balance has been successfully......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (2)
Ductile fracture, such as micro-cavities and micro-voids, inevitably exist and evolve under tensile stress state in metal forming. Ductile fracture sw......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (2)
The microstructure, fracture morphology and tensile fracture process of high manganese steel with single-phase austenite after water toughening have b......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (2)
Debonding failures are a common problem in concrete bridge decks strengthened with adhesively attached carbon-fibre reinforced polymer (CFRP) strips. ......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (2)
To study the law of corrosion on the mechanical properties of the components used in spatial steel structures and obtain the load-carrying capability ......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (3)
Constitutive equations describing the flow stress of Q235 steel undergoing hot plastic deformation have been developed by integrating the microstructu......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (3)
Effects of adding 0.3 wt.% Al in Zn bath on the microstructure and reaction kinetics of intermetallic compounds have been studied using Co/Zn and Co/Z......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (3)
CF/POM/CNT ternary composites have been prepared by melt blending method with carbon nanotubes (CNT) as modifier, maleic anhydride (MAH) as interfacia......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (3)
In contrast to the conventional methods of improving interface and performances of UHMWPE fiber composites through fibre surface modification, this pa......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (3)
The surface of the carbon fiber (CF) has been pretreated by liquid phase deposition of niicrocrystalline cellulose (MCC). X-ray photoelectron spectros......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (3)
Samples of directionally solidified Mg-9Zn-2Y alloys have been obtained using vacuum induced directional solidification equipment. The metallographic ......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020; 27 (4)
In this paper, development and characterization of pure aluminium (Al) reinforced with metallic amorphous Ni60Nb40 particles has been presented. Ni60N......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2019; 26 (1)
This study evaluated the pavement performances of polyethylene (PE) modified asphalt mixture (PEHMA) containing reclaimed asphalt pavement (RAP). A se......
期刊： INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2019; 26 (1)
In this paper, the principles of flexible blank holder technology applied to the multi-point forming process is introduced and a finite element model ......
