期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2021; 122 (7)
Mechanical properties, such as the tensile anisotropy, of bcc metal sheets are significantly influenced by their rolling textures, so it is important ......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2021; 122 (1)
In the dynamic theory of martensitic transformations, temperature M-s of the start of transformation corresponds to conditions that are optimal for ge......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2021; 122 (3)
The effect of 15-keV Ar+ ions on the structure of austenitic chromium-nickel steel in the 3.1 x 10(17)-7.5 x 10(17) cm(-2) fluence range has been inve......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2021; 122 (3)
In the present work, the melt structure was affected by controlling the important factors of the melt holding time and cooling rate. The microstructur......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2021; 122 (4)
The aging hardening and evolution of precipitation phase of 7136 aluminum alloy during aging treatment were investigated. The research revealed that h......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (2)
In this paper, the microstructure and mechanical properties of A356 aluminum alloy prepared by the combined forming process of casting and back extrus......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (2)
Amorphous (Fe1-xCox)(86)Hf7B6Cu1 ribbons were prepared by using the single-roller melt-spinning technique. The microstructure, crystallization activat......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (3)
The microhardness, the structure of the maraging steel (MAS) 03N18K3M3T, and its susceptibility to delayed fracture (DF) after various regimes of trea......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (3)
This study is to fabricate a composite substrate (Ni7W/Ni12W/Ni7W) with weak magnetization, strong reinforcement, and improved cube texture via Rollin......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (3)
In this work the formation of strong recrystallization cube texture in heavily rolled Ni-9.3 at % W has been studied. During the cold rolling (also kn......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (3)
In this study, HoxCe2-xCo17 (x = 0, 0.2, 0.6, 1.0) powders were fabricated by melting and ball milling successfully. The influence of Ho content on ph......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (12)
The magnetoresistive characteristics of magnetic metallic Fe/Cr and Co90Fe10/Cu superlattices subjected to irradiation with accelerated Ar+ ion beams ......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (14)
In this research, ball-on-plate reciprocating sliding wear tests were conducted on shot-peened specimens of ductile iron heat treated by either austem......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (14)
Aluminum/copper dissimilar joints are widely used in electronics, the automobile industry, and battery manufacturing. Ultrasonic spot welding (USW), a......
期刊： PHYSICS OF METALS AND METALLOGRAPHY, 2020; 121 (14)
The effects of cooling rate on the microstructure and phase transformation mechanism of TC4 alloy during the continuous cooling of beta phase region w......
