期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (8)
The austenite/ferrite interface movement during intercritical annealing of 0.15C-8.0Mn-2.1Al (wt-%) steel was simulated by DICTRA software under local......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (10)
The grain boundary character distributions of TP347H stainless steel after different thermo-mechanical processes in terms of grain boundary engineerin......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (6)
In order to investigate the deterioration of microstructure in service, the intrinsic microstructural stability and performance of DD6 during long-ter......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (4)
Effects of Zn content (0-1.5, in wt.%) on damping capacities of the as-homogenised and the hot-rolled Al-9.2Mg alloys are investigated. The Zn additio......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (5)
The present study investigated the influences of Dy-addition on the microstructural characterization, functional behaviour and deformation mechanisms ......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (6)
Dynamic compressive behavior of 2 kinds of Al/Teflon reactive materials samples are analyzed by using the Split Hopkinson pressure bar. The mass perce......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (5)
Mg-Al-Zn alloys with different Al content and different cooling conditions were prepared. The solid solution content of Al and Zn in the alloy was det......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (5)
In this study, soft magnetic FeCoNiCrAl high-entropy alloys (HEAs) were synthesised by high-energy ball milling using Fe, Co, Ni, Cr and Al powders as......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (6)
In this study, in-situ Al2O3p/Al composite was prepared by the exothermic dispersion method from Al-calcined kaolin system. Thermodynamic analysis was......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (7)
A series of Al0.3CoFeMnNiBx high-entropy alloys (x = 0-0.5 in molar ratio) were prepared by vacuum arc melting method. The as-cast Al0.3CoFeMnNi alloy......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (8)
The effect of Al content on microstructures and properties of Fe1.25CoCrNi1.25Alx (x = 0.1, 0.25, 0.4) high-entropy alloys was studied. The alloys are......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (9)
Zirconium is used as an alloying element owing to its ability to form carbides, nitrides, oxides, and other intermetallic compounds. Zirconium alloyin......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (4)
The solidification modes of high manganese steels were measured by experiments and comparatively calculated by different predicted methods. The DSC ex......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (10)
The microstructure evolution of Zn-0.62Mn alloys during the room temperature compression with different strains was investigated by scanning electron ......
期刊: MATERIALS SCIENCE AND TECHNOLOGY, 2021; 37 (9)
Aluminium alloys are commonly used in different areas and considerable interest has been given to additive manufacturing (AM) aluminium alloys recentl......