期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (7)
AlCrFeCoNi particles were added to Mg-9Al-1Zn alloy in a rotary blowing process. The microstructures and mechanical properties of Mg-9Al-1Zn based com......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (1)
The 25Cr2MoVA steel was subjected to various heat treatments. We found that the hardness increased when the quenching temperature was in the range of ......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (3)
The effect of adding cerium on the microstructure and acid rain corrosion resistance of the AlSi11Cu3 alloy was investigated by means of optical micro......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (7)
The effects of ethylene-vinyl acetate copolymer (EVA) and dicumyl peroxide (DCP) addition on injection moldability and tensile properties of recycled ......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (8)
Al7075-Ti-Y natural composites were prepared by using a combination of ultrasonic vibration and casting. The effects of titanium (Ti) and yttrium (Y) ......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (4)
The effects of ultrasonic melt treatment (UST) on the microstructure and tensile properties of Al-25% Si alloys with and without phosphorus addition w......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (2)
The effects of additions of Co and Ni to the FeNbBCu alloys on the glass forming ability (GFA), soft magnetic properties and electrical resistivity of......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (2)
The Cu-12.5Ni-5Sn-xFe alloys were prepared using powder metallurgy. The effect of the amount of Fe addition on the microstructure and mechanical chara......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (1)
Two methyl-modified Al2O3/SiO2 xerogels, i. e. AIP-Al2O3/ MSiO2 and ANN-Al2O3/MSiO2 xerogels, were prepared using aluminum isopropoxide and aluminum n......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (5)
In this work, TA2/T2 was used as a composite interlayer to prevent the formation of brittle Ti-Fe intermetallics when joining TC4 Ti alloy to 304 stai......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (4)
Ni/WC/graphene oxide (GO) composite cladding fusion coatings were fabricated through the vacuum cladding technique on a medium carbon structure steel ......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (2)
The present study elucidates the influence of Mo content on the microstructure - toughness relationship in the coarse-grained heat-affected zone of hi......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (4)
The effect of pulsed magneto oscillation (PMO) on the microstructure and tensile properties of Al-25% Si alloys with and without phosphorus addition w......
期刊： INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021; 112 (3)
To avoid the formation of Ti-Ni intermetallics in a joint, three laser welding processes for Ti alloy-NiTi alloy joints were introduced. Sample A was ......
